For Toyota Prado 150 Front CMOS Camera Grille Reversing Parking Cam View Reverse

Suitable for the grille of a Toyota Prado 150

$42.00
RRP $64.00
SAVE $22.00 (34%)

Item Number: FC-01TP

In Stock

Get the best deals for Toyota Prado 150 Front CMOS Camera Grille Reversing Parking Cam View Reverse at digoptions.com

Have Questions? Contact Us Here

Calculate Shipping


Vehicle Specific, License Plate Light CMOS Car Rear View Reverse Parking Camera 

 

Compatible model

Toyota Prado 2012, 2013, 2014, Onwards 

 

Introduction

Cameras from DIG Options are Australian approved/certified, vigorously tested in harsh Australian conditions and backed for an Australia 12 month warranty.

This CMOS camera from DIG Options features a miniature and non-obtrusive design with special trouble-free micro 4-pin connector.

Distance guidelines are built into the camera to offer approximate distance grid lines which range from safe to STOP THE CAR!

The 170* degree viewing range with advanced Image Sensor provides the latest technology in reverse cameras.

Due to the cameras low light properties it works brilliantly at night using the light generated from your reverse lights and the camera is water resistant.

The camera features an RCA plug for connection into your monitor video input as well as built in trigger line which means you won't need to run a separate wire for the reverse power trigger input.

 

Product Features: 

1. High Quality CMOS Image Sensor

2. Vehicle Specific Fitment means there's no need to drill holes into your car. Just remove the existing license plate light/blank plate and install. 

3. Genuine Look!

4. Supplied with 5m Video cable with built-in trigger wire

5. Smart-Install Plug is only 5mm in diameter and makes install a breeze 

6. 170* degree viewing angle – any more and the image is heavily distored

7. Waterproof IP66 rating (IP68 also available)

8. Full Colour Camera

9. Distance Mark / Grid Lines

10.Great viewing in darkness with reverse lights

11. Australian certified and approved

*170 degree refers to an International Rating Standard which measures the viewing angle diagonally.

 

Specification 

CMOS

CCD

IMAGE DEVICE

SHARP 1/4" CCD

SYSTEM

NTSC

EFFECTIVE PIXELS

512 X 582 PIXELS

SENSING AREA

3.6MM X 2.7MM

SCANNING SYSTEM

 

SYNC SYSTEM

INTERNAL

RESOLUTION

420 TV LINES

HORIZONTAL FREQ

 

VERTICAL FREQ

 

MIN ILLUMINATION

1.0LUX / F2.0

VIDEO OUTPUT

1.0V 75 Ohm

GAMMA CONSUMPTION

0.45

AGC

AUTO

S/N RATIO

BETTER THAN 48DB

WHITE BALANCE

AUTO

ELECTRONIC SHUTTER

1/10,000 SECOND

BLC

AUTO

CURRENT CONSUMPTION

120mA

POWER SUPPLY

12v

OPERATING TEMP

-20C  - 70C    RH95%MAX

STORAGE TEMP

-40C - 85C    RH95% MAX

LENS

f=2.1 / F=2.0

LENS ANGLE

140 DEGREES

 
SKU FC-01TP
Barcode # 729436059337
Brand DIG Options
Shipping Weight 0.1000kg
Shipping Width 0.100m
Shipping Height 0.030m
Shipping Length 0.050m

Shipping and Handling

Important. Although many sellers may state they are located in Australia, they may not be. Before any purchase check that the goods are in Australia. If the goods are shipped from overseas you may need to wait longer for your item, need to pay customs taxes and return a faulty product back overseas. Unless otherwise stated, ALL Factory Fit items are warehoused in Melbourne, Australia.

Factory Fit will ship to confirmed Paypal addresses only. In most cases you will receive your item within 4 days. If there is a delay Factory Fit will be in contact with you. Please advise your phone number at checkout so we can get in touch with you if there is any problem.

If requested, we can supply the tracking number to you. If we are shipping outside Australia then the buyer is responsible for destination import tax/charges. We will reduce this where possible by nominating a low value and sending as a 'gift'. Factory Fit reserves the right not to be held responsible for a delay caused by import customs as this is out of our control.

Factory Fit will supply all international customers and in most cases ship direct from our freight forwarder in China. If you have any concerns please ask.

 

Payment Policy

Immediate Payment is required after the Winning Bid via paypal. If you do not have a Paypal account, please message us for another payment option. Discounts apply for direct deposit and cash with local pickups. If you require our Company Bank Account details for direct deposit please email or message us.

 

Returns Policy

Factory Fit products are covered by a minimum 1 year warranty from the original purchase date. Following any repairs or replacement you will be covered by a minimum 1 month warranty or the remainder of your new product warranty, whichever is greater. If you do find a product purchased from Factory Fit becomes faulty within 12-months of your purchase, simply send the faulty part back for repair or replacement (at our discretion). Non-manufacture faults (neglect, improper installation, misuse or incorrect service) and consumables are not be covered by this warranty. Freight  to and from our service centre in Melbourne to be covered by the buyer. Please message Factory Fit for detailed terms of this warranty.

Note. The limited Factory Fit warranty is not transferable and all warranties should be handled through the original purchaser. Factory Fit reserves the right to refuse warranty in such cases.

Factory Fit guarantees that all items sold are brand new and quality tested before shipment (unless otherwise stated).

Important: If a non-manufacturing fault is found during a Factory Fit inspection, Factory Fit will request from the purchaser the repair cost plus two way postage before the product is returned.

Factory Fit offers a 7 day return policy. In the unlikely event that you receive an incorrect item, please ensure you return it to Factory Fit within 7 days, in original packaging and in brand new, un-installed, resalable condition. Please contact us for a Return Authorisation Form (RTA) before sending anything back to Factory Fit.

 
About Us

Factory Fit is a Melbourne, Australia based operation and since 2008, a proud supplier to the Car Audio/Video industry on a wholesale base. Factory Fit are now going direct to offer consumers and installers the best value for money on car audio fitting accessories to become the number one supplier. We have over 10 years experience in electronics, tooling, industrial design and engineering, and we are proud to acknowledge our commitment to offering a high level of After Sales service, even years after your purchase. We provide an Australian phone number on request and unlimited support during business hours.

Factory Fit will strive to offer a large range of accessories for any vehicle. If you have an item you are looking for please message us and if we can get it, we will order it in for you.

LEGAL DISCLAIMER:

It is an offence to copy the descriptions and/or images of another business/seller. If you copy any of our descriptions or images we will contact eBay and your account will be suspended. Factory Fit reserves the right of all descriptions and images listed in this listing.

 
 
For Toyota Prado 150 Front CMOS Camera Grille Reversing Parking Cam View Reverse has a rating of 0/5 based on 0 reviews.

Be The First To Review This Product!

Help other DIG Options Electronics users shop smarter by writing reviews for products you have purchased.

Write a product review