Masten TPMS Remote Control for TP-05 & TP-06 Pair Sensors without Inflating

Pair sensors without operating the monitor

$140.00
RRP $149.00
SAVE $9.00 (6%)

Item Number: TP-05R

In Stock

The Remote Control for Tyre Monitor Pressure System Internal (TP-05) and External (TP-06) allows you to program sensors from the tyres.

Have Questions? Contact Us Here

Calculate Shipping


Remote Control 

Suitable for TP-05 and TP-06

Features 

- Help sensors to transmit signals without inflating and deflating and exchange wheel positions. 

- Save Sensor Electricity

- it will let you test Sensors functions. 

Please note this Control Remote only works with DigOptions TPMS

 

What's Included

  1. Remote Control

6 Good Reasons to Install a TPMS

1. Prevent tire puncture

When the tire is high or low, or high temperature, the system will send a trigger warning in time to reduce the puncture possibility

2. Tire leaking warning

When the tire is leaking, the system will immediately send a trigger warning

3. Reduce tire wear

It will accelerate tire wear when the tire pressure is too high or too low. Keep the tire pressure correct to extend tire life.

4. Tire balance

Vehicle deviation will easily occur if tires are unbalanced. Maintain the pressure balance of the 4 tires to improve vehicle handling and shorten the braking distance

5. Save fuel

When the tire pressure is low, the fuel consumption will be increased due to the high rolling resistance of the tire.

6. Govenment Legislation

In 2007 the US government legislated the mandatory installation of TPMS to new vehicles. 

In 2012, 27 countries in the European Union plus Japan and Korea legistalted the mandatory installation of a TPMS to new vehicles. 

In 2016, China, Australia and several South East Asian countries will legislate the mandatory installation of TPMS to new vehicles. 

SKU TP-05R
Barcode # 792019218223
Brand Masten
Shipping Weight 0.0290kg
Shipping Width 0.360m
Shipping Height 0.070m
Shipping Length 0.150m

Shipping and Handling

Important. Although many sellers may state they are located in Australia, they may not be. Before any purchase check that the goods are in Australia. If the goods are shipped from overseas you may need to wait longer for your item, need to pay customs taxes and return a faulty product back overseas. Unless otherwise stated, ALL Factory Fit items are warehoused in Melbourne, Australia.

Factory Fit will ship to confirmed Paypal addresses only. In most cases you will receive your item within 4 days. If there is a delay Factory Fit will be in contact with you. Please advise your phone number at checkout so we can get in touch with you if there is any problem.

If requested, we can supply the tracking number to you. If we are shipping outside Australia then the buyer is responsible for destination import tax/charges. We will reduce this where possible by nominating a low value and sending as a 'gift'. Factory Fit reserves the right not to be held responsible for a delay caused by import customs as this is out of our control.

Factory Fit will supply all international customers and in most cases ship direct from our freight forwarder in China. If you have any concerns please ask.

 

Payment Policy

Immediate Payment is required after the Winning Bid via paypal. If you do not have a Paypal account, please message us for another payment option. Discounts apply for direct deposit and cash with local pickups. If you require our Company Bank Account details for direct deposit please email or message us.

 

Returns Policy

Factory Fit products are covered by a minimum 1 year warranty from the original purchase date. Following any repairs or replacement you will be covered by a minimum 1 month warranty or the remainder of your new product warranty, whichever is greater. If you do find a product purchased from Factory Fit becomes faulty within 12-months of your purchase, simply send the faulty part back for repair or replacement (at our discretion). Non-manufacture faults (neglect, improper installation, misuse or incorrect service) and consumables are not be covered by this warranty. Freight  to and from our service centre in Melbourne to be covered by the buyer. Please message Factory Fit for detailed terms of this warranty.

Note. The limited Factory Fit warranty is not transferable and all warranties should be handled through the original purchaser. Factory Fit reserves the right to refuse warranty in such cases.

Factory Fit guarantees that all items sold are brand new and quality tested before shipment (unless otherwise stated).

Important: If a non-manufacturing fault is found during a Factory Fit inspection, Factory Fit will request from the purchaser the repair cost plus two way postage before the product is returned.

Factory Fit offers a 7 day return policy. In the unlikely event that you receive an incorrect item, please ensure you return it to Factory Fit within 7 days, in original packaging and in brand new, un-installed, resalable condition. Please contact us for a Return Authorisation Form (RTA) before sending anything back to Factory Fit.

 
About Us

Factory Fit is a Melbourne, Australia based operation and since 2008, a proud supplier to the Car Audio/Video industry on a wholesale base. Factory Fit are now going direct to offer consumers and installers the best value for money on car audio fitting accessories to become the number one supplier. We have over 10 years experience in electronics, tooling, industrial design and engineering, and we are proud to acknowledge our commitment to offering a high level of After Sales service, even years after your purchase. We provide an Australian phone number on request and unlimited support during business hours.

Factory Fit will strive to offer a large range of accessories for any vehicle. If you have an item you are looking for please message us and if we can get it, we will order it in for you.

LEGAL DISCLAIMER:

It is an offence to copy the descriptions and/or images of another business/seller. If you copy any of our descriptions or images we will contact eBay and your account will be suspended. Factory Fit reserves the right of all descriptions and images listed in this listing.

 
 
Masten TPMS Remote Control for TP-05 & TP-06 Pair Sensors without Inflating has a rating of 0/5 based on 0 reviews.

Be The First To Review This Product!

Help other DIG Options Electronics users shop smarter by writing reviews for products you have purchased.

Write a product review