TPMS Tire Pressure Monitor System 4 Internal Valve 22 Sensors DVD Video Car

Monitor up to 22 Sensors on a Car Monitor

RRP $238.05
SAVE $31.05 (13%)

Item Number: TP-09SI

In Stock

The Masten TP-09SI TPMS Tyre Pressure Monitor System with 4 High-Quality Valve-Type Sensors is specifically designed for Camera Monitors and In-Dash Navigation/Multimedia Systems with a Reverse Trigger wire. Monitor up to 22 Sensors on a Car Monitor

Have Questions? Contact Us Here

Customise Your Purchase:

Total cost for customisations will be added on the cart page


IMPORTANT - This Listing DOES NOT include a stereo. It includes the following parts:

  1. Universal TPMS Module x 1
  2. Premium Internal Sensors x 4
  3. Installation wiring x 1 set
  4. Manual Switch Display Controller  x 1

Install guide:

  1. Power the camera (not included) from the reverse light. This is the only power required from the reverse light. DO NOT connect power of the reverse light to the TPMS or Car Radio Trigger wire.
  2. Power up the TPMS to 12V power and earth it. 
  3. Connect the Positive trigger wire (white) of the TPMS to the Camera trigger wire on the car radio. 
  4. Plug the RCA from the TPMS Module into the Camera RCA input on the car radio

TPMS for existing monitor. With Premium Internal Valve Sensors with 5 Year Life

Spare Sensors:

If you're after spare sensors the part numbers are TP-09S (internal valve) and TP-10S (external cap)



The Masten TP-09 TPMS Tyre Pressure Monitor System is specifically designed for Camera Monitors and In-Dash Navigation/Multimedia Systems with a Reverse Trigger wire.

The TPMS module simply sits inline between your reverse camera and monitor. This means that your reverse camera will operate normally however, the Tyre data can be viewed manually on demand by using the button, or automatically if there is a critical problem with the pressure or temperature of your tyres. 


Feature List:

  • Pressure Range: 0~116PSI (0~8 BAR)
  • In-Dash Navigation System module specifically designed for In Dash A/V Monitor Displays
  • Monitor up to 22 Sensors
  • Monitor the pressure/temperature of four wheels at the touch of a button through your in dash A/V monitor
  • Your existing reverse camera can be connected to the Masten TPMS control module allowing for dual connection through the one input
  • Simple installation! Just connect the module into your Video or Camera input. If you don't have a camera input, this TPMS module will allow you to add a reverse camera.
  • TPMS information screen will automatically appear if a tyre problem is detected
  • The multi colour interface allows you to easily identify problem tyres in red for fast evaluation
  • Wireless multi-function power button can be mounted anywhere for drivers convenience
  • User programmable high and low pressure range
  • High quality alloy valves 
  • 5-year transmitter life
  • User friendly programming functions
  • Reliable and easy to install.
  • Directly displays tire data on the vehicle display
  • Selectable pressure units: BAR or PSI.
  • Selectable temperature units: °C or 0F.
  • Configurable high / low pressure alert setting.
  • Configurable high temperature alert setting.
  • Selectable trailer ID and tractor ID.
  • Enlargeable signal transmission in case of long distance from sensors to the receiver
  • Several ways for sensor coding.
  • TPMS hand-held tool coding available.

Important. This will only work with 9-12V camera output. If you are connecting a genuine camera they can be 5-6V and will not work without some amplification.


Sleep Function:

If the sensors have not been moved for 1 hour or more they will be in sleep mode. After around 5 seconds of movement the sensors will 'wake' up and start sending the tyre information data (pressure/temperature) every 6 seconds to the monitor.


User Manual:

Included in box and available upon request.

Wireless Range: 7 metres (any more and you need our repeater - TP-09REP)


Battery Type:

Remote Control: CR2025 (3V)


Install Guide:

Internal Sensors

Included in box and available upon request.


External Cap Sensors

Included in box and available upon request.



Optional Accessory - Masten Range Extender


How can the alarm for low pressure be switched off? 

You can press the remote about 2 seconds to cancel the alarm sound, but the TP-09/TP-10 App alert data will still flash till the problems is solved.


Will this system work with my In Dash Car DVD? 

Yes. If your current system has an RCA camera input, and a trigger line input (used for sending power from the reverse lamp to the stereo), it will work. 


What are Tyre Pressure Monitor Systems?

passenger vehicles in the 1980s and today is a mandatory feature in the United States. 

Benefits of a Masten TPMS?


The dynamic behavior of a pneumatic tire is closely connected to its inflation pressure. Key factors like braking distance and lateral stability require the inflation pressures to be adjusted and kept as specified by the vehicle manufacturer. Extreme under-inflation can even lead to thermal and mechanical overload caused by overheating and subsequent, sudden destruction of the tire itself. Additionally, fuel efficiency and tire wear are severely affected by under-inflation. Tires do not only leak air if punctured, they also leak air naturally, and over a year, even a typical new, properly mounted tire can lose from 20 to 60 kPa (3 to 9 psi), roughly 10% or even more of its initial pressure.

The significant advantages of TPMS are summarized as follows:

Fuel savings: According to the GITI, for every 10% of under-inflation on each tire on a vehicle, a 1% reduction in fuel economy will occur. In the United States alone, the Department of Transportation estimates that under inflated tires waste 2 billion US gallons (7,600,000 m3) of fuel each year.

Extended tire life: Under inflated tires are the #1 cause of tire failure and contribute to tire disintegration, heat buildup, ply separation and sidewall/casing breakdowns. Further, a difference of 10 lbs. in pressure on a set of duals literally drags the lower pressured tire 13 feet per mile. Moreover, running a tire even briefly on inadequate pressure breaks down the casing and prevents the ability to retread. It is important to note that not all sudden tire failures are caused by under-inflation. Structural damages caused, for example, by hitting sharp curbs or potholes, can also lead to sudden tire failures, even a certain time after the damaging incident. These cannot be proactively detected by any TPMS.

Decreased downtime and maintenance: Under-inflated tires lead to costly hours of downtime and maintenance.

Improved safety: Under-inflated tires lead to tread separation and tire failure, resulting in 40,000 accidents, 33,000 injuries and over 650 deaths per year. Further, tires properly inflated add greater stability, handling and braking efficiencies and provide greater safety for the driver, the vehicle, the loads and others on the road.

Environmental efficiency: Under-inflated tires, as estimated by the Department of Transportation, release over 57.5 billion pounds of unnecessary carbon-monoxide pollutants into the atmosphere each year in the United States alone.

6 Good Reasons to Install a TPMS

1. Prevent tire puncture

When the tire is high or low, or high temperature, the system will send a trigger warning in time to reduce the puncture possibility

2. Tire leaking warning

When the tire is leaking, the system will immediately send a trigger warning

3. Reduce tire wear

It will accelerate tire wear when the tire pressure is too high or too low. Keep the tire pressure correct to extend tire life.

4. Tire balance

Vehicle deviation will easily occur if tires are unbalanced. Maintain the pressure balance of the 4 tires to improve vehicle handling and shorten the braking distance

5. Save fuel

When the tire pressure is low, the fuel consumption will be increased due to the high rolling resistance of the tire.

6. Govenment Legislation

In 2007 the US government legislated the mandatory installation of TPMS to new vehicles. 

In 2012, 27 countries in the European Union plus Japan and Korea legistalted the mandatory installation of a TPMS to new vehicles. 

In 2016, China, Australia and several South East Asian countries will legislate the mandatory installation of TPMS to new vehicles. 

Receiver Specifications:

Working temperature: - 20 ℃ ~ 80 ℃

Storage temperature: - 30 ℃ ~ 85 ℃

The charger input voltage: DC 12 ~ 24 v

Frequency: 433.92 MHz


Sensor Specifications:

Operational Temperature: -40 to 80°C

Storage Temperature: -40 to 85°C

Pressure Range: 0 to 8BAR, 0~116PSI

Pressure Accuracy: ±0.1BAR, ±1.5PSI

Temperature Accuracy: ±3°C

Transmission Power:<10dBm

Transmission Frequency: 433.92MHz

Battery life: Approx 5 years

Size: Size: 60(L) x 35(W) x21(H)mm

Weight: 48g

Barcode # 2000000004266
Brand Masten
Shipping Weight 0.5000kg
Shipping Width 0.175m
Shipping Height 0.130m
Shipping Length 0.060m
Shipping Cubic 0.001365000m3
Assembled Length 0.060m
Assembled Height 0.130m
Assembled Width 0.175m

2 Year Warranty

1 Year Warranty on Sensors



Changing the Pressure Alarm Ranges

Our TP-09 and TP-10 TPMS Systems have an adjustable pressure alarm range however this is set to a minimum of 25PSI. Check with us if this has changed as we are constatly improving our products. 

To switch off the alarm noise if you are running below this then you can hold the TPMS button to disable the sound. 

For changing the alarm ranges please refer to the manual on page 4, 3-4 Parameter settings
The Alarm needs to be set from the DVD interface of parameter setting.

When the vehicle is in the DVD working mode, Press the SET button for 2 seconds to  choose "High pressure pressure alert setting", press SET button for 1 second to enter parameter setting, Press CODE button to save and exit setting mode.

TPMS Tire Pressure Monitor System 4 Internal Valve 22 Sensors DVD Video Car has a rating of 0/5 based on 0 reviews.

Be The First To Review This Product!

Help other DIG Options Electronics users shop smarter by writing reviews for products you have purchased.

Write a product review