Extra TPMS Sensor for TP-10 to TP-20 Tyre Pressure Monitor Systems PSI Bar

Heavy Duty with LF Code Setup - No need to deflate!

RRP $73.60
SAVE $10.60 (14%)

Item Number: TP-20S

In Stock

This premium Truck, 4x4, Caravan Long Range sensor can be added most Masten TPMS Systems from TP-10 to TP-20

Have Questions? Contact Us Here

Calculate Shipping

Waterproof Rating: IP69K - Sensors can be kept under 1m of water for short period of time. Ensure caps are tight before taking sensors under water - if damage occurs due to sensors not be tigthened warranty is void.

With new IP ratings, Masten's rearview cameras and tyre sensors are even more advantageous in environments requiring a high degree of protection from dust, submersion, and high-pressure, high-temperature spray-down. This level of protection is essential in many food & beverage, pharmaceutical, and petrochemical markets but also applies to off road activities namely river crossing. 


Heavy Duty 4x4/Truck/Caravan Sensor with Massive Pressure Range 0 to 13 BAR / 0 to 188PSI

Also Featuring Faster Pairing with LF Pair Sensor which means there is no need to deflate the tyre to pair!

IMPORTANT - This Listing includes one sensor to suit the Masten Range of Premium TPMS Kits

External Cap Specifications 

  1. Operational Temperature: -40 to 80°C
  2. Storage Temperature: -40 to 85°C
  3. Pressure Range: 0 to 13 BAR, 0~188PSI
  4. Pressure Accuracy: ±0.1BAR, ±1.5PSI
  5. Temperature Accuracy: ±3°C
  6. Transmission Power:<10dBm
  7. Transmission Frequency: 433.92MHz
  8. Battery life: 2 years(CR1632, -40 to 80°C)
  9. Size: 24mm(diameter) x 21mm(height) - without anti-theft housing
  10.         27mm(diameter) x 23mm(height) - with anti-theft housing
  11. Weight: 11.5g, without anti-theft housing

      15.4g, with anti-theft housing

External Cap Sensors Manual:





What are Tyre Pressure Monitor Systems?

passenger vehicles in the 1980s and today is a mandatory feature in the United States. 


Benefits of a Masten TPMS?

The dynamic behavior of a pneumatic tire is closely connected to its inflation pressure. Key factors like braking distance and lateral stability require the inflation pressures to be adjusted and kept as specified by the vehicle manufacturer. Extreme under-inflation can even lead to thermal and mechanical overload caused by overheating and subsequent, sudden destruction of the tire itself. Additionally, fuel efficiency and tire wear are severely affected by under-inflation. Tires do not only leak air if punctured, they also leak air naturally, and over a year, even a typical new, properly mounted tire can lose from 20 to 60 kPa (3 to 9 psi), roughly 10% or even more of its initial pressure.

The significant advantages of TPMS are summarized as follows:

Fuel savings: According to the GITI, for every 10% of under-inflation on each tire on a vehicle, a 1% reduction in fuel economy will occur. In the United States alone, the Department of Transportation estimates that under inflated tires waste 2 billion US gallons (7,600,000 m3) of fuel each year.

Extended tire life: Under inflated tires are the #1 cause of tire failure and contribute to tire disintegration, heat buildup, ply separation and sidewall/casing breakdowns. Further, a difference of 10 lbs. in pressure on a set of duals literally drags the lower pressured tire 13 feet per mile. Moreover, running a tire even briefly on inadequate pressure breaks down the casing and prevents the ability to retread. It is important to note that not all sudden tire failures are caused by under-inflation. Structural damages caused, for example, by hitting sharp curbs or potholes, can also lead to sudden tire failures, even a certain time after the damaging incident. These cannot be proactively detected by any TPMS.

Decreased downtime and maintenance: Under-inflated tires lead to costly hours of downtime and maintenance.

Improved safety: Under-inflated tires lead to tread separation and tire failure, resulting in 40,000 accidents, 33,000 injuries and over 650 deaths per year. Further, tires properly inflated add greater stability, handling and braking efficiencies and provide greater safety for the driver, the vehicle, the loads and others on the road.

Environmental efficiency: Under-inflated tires, as estimated by the Department of Transportation, release over 57.5 billion pounds of unnecessary carbon-monoxide pollutants into the atmosphere each year in the United States alone..

6 Good Reasons to Install a TPMS

1. Prevent tire puncture

When the tire is high or low, or high temperature, the system will send a trigger warning in time to reduce the puncture possibility

2. Tire leaking warning

When the tire is leaking, the system will immediately send a trigger warning

3. Reduce tire wear

It will accelerate tire wear when the tire pressure is too high or too low. Keep the tire pressure correct to extend tire life.

4. Tire balance

Vehicle deviation will easily occur if tires are unbalanced. Maintain the pressure balance of the 4 tires to improve vehicle handling and shorten the braking distance

5. Save fuel

When the tire pressure is low, the fuel consumption will be increased due to the high rolling resistance of the tire.

6. Govenment Legislation

In 2007 the US government legislated the mandatory installation of TPMS to new vehicles. 

In 2012, 27 countries in the European Union plus Japan and Korea legistalted the mandatory installation of a TPMS to new vehicles. 

In 2016, China, Australia and several South East Asian countries will legislate the mandatory installation of TPMS to new vehicles. 

Barcode # 792019218384
Brand Masten
Shipping Weight 0.4900kg
Shipping Width 0.200m
Shipping Height 0.100m
Shipping Length 0.100m
Assembled Width 0.200m

2 Year Warranty on Module

1 Year Warranty on Sensors

Extra TPMS Sensor for TP-10 to TP-20 Tyre Pressure Monitor Systems PSI Bar has a rating of 0/5 based on 0 reviews.

Be The First To Review This Product!

Help other DIG Options Electronics users shop smarter by writing reviews for products you have purchased.

Write a product review