Skip to main content

Trak Racer TR120 Overview with an Unbeatable 5 Year Warranty!

With TR One Front Mounting Wheel Mount - Compatible models listed below

Trak Racer is the Official Simulator Supplier of Alpine F1 Team and Airbus Aircrafts.

Key Benefits of TR120: 

  1. Rigid 120mm x 40mm thicker-walled Aluminium Extrusion Profile - Anodized Black
  2. Side-Mounted Wheel Uprights with 120 x 40mm Heavy Duty Brackets
  3. Unique wide-end Chassis for greater support and aesthetics 
  4. Over 30 optional accessories
  5. Compatible with TR One Wheel and Shifter Mounting Systems

The TR120 has been designed with experience gained since Trak Racer started in 2008. The base structure is 120 × 40mm high-end aluminium T-Slot extruded profile, anodized in black. Your choice of wheel mount will be supported by 120 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets - mounted to the side for additional support.

Heavy-duty anodized black 90-degree brackets connect the frame and laser cut carbon steel plates allow you to attach your peripherals. The TR120 supports the strongest Direct Drive Force Feedback systems on the market and of course, is also Belt Drive Wheel Ready.

The TR120 is pre-drilled and for all popular steering wheels, pedals and shifters on the market and comes with your choice of 4 Stiffened Wheel Mounts for No-Flex Racing as well as options for pedal deck, shifter mount and more. 

The Trak Racer accessory range is also constantly evolving to offer over 30 add-on options including speaker mounts, monitor stands, bass shaker mounts, keyboard mounts and more. Designed and Engineered in Australia.

What's Included

  • Wheel Mount - TR One Front Mounting Wheel Mount for Simucube, VRS, Accuforce, OSW, Mige, Fanatec Direct Drive Wheels (Podium, CSL and Pro) and more
  • Pedal Support Plates - Pedal Mount must be selected (select from the Pre-Drilled Pedal Plate OR Aluminium Profile Pedal Mount with Heel Plate) 
  • BONUS Rubber Feet to protect floors
  • Set of 10 Cable Ties
  • Red Coloured Strips
  • 120mm x 40mm Black Anodized Aluminium Chassis
  • 120mm x 40mm Black Anodized Aluminium Wheel Supports
  • All Mounting Screws, Brackets and Fixtures included
  • Assembly Tool Kit Included

 

Optional

  • All Mounting Screws, Brackets and Fixtures included
  • Assembly Tool Kit Included

About the TR One Wheel Mounting System

The TR One Wheel System will allow you to purchase updated wheel mounts that fit the base (and most expensive) part of the kit. 

The base kit (Part Number: TR80-NWMA) consists of 2 High-Quality 80x40mm Aluminium Profiles and 4 Red Anodised Aluminium Plates. Optional wheel mounts include a wheel deck and direct-drive front mounting plate. The plates themselves are extremely rigid and have a lot of adjustment for angle and forward/backwards fine-tuning - to get a perfect position!

Optional - Select from Drop Down Menu

  • Seat Mounting Brackets
  • Recommended Accessories
  • Trak Racer Premium Race Seat

Customise your Rig with an Unbeatable Product Range

Frame/Chassis Features

  • Unique curved design with Trak Racer proprietary profile connector
  • Constructed from high quality extruded aluminium
  • 580mm wide and 1,400mm long (including 780mm profile, 500mm profile and Trak Racer's proprietary profile connector)
  • Low ground clearance with hardwood rubber floor protectors
  • Finished in black anodized high-quality aluminium

Adjustable Pedal Mount Features - Select your preferred mounting plate

  • Unique Bracket Design allows you to position the pedal low or in a high position and also slide for fine-tuning
  • Thick, no-flex Carbon Steel Construction OR Aluminium Profile with included Heel Rest
  • Pre-drilled mounting points for all major brand pedals OR mount your pedals directly to the profile

Optional Bucket or Recline Seat - Select a Seat and Seat Brackets from the Options

Select from the range of high-quality Trak Racer seats

  • Premium race-ready high-grade seat with hardback
  • Adjustable driving position seat
  • Ergonomically designed for extended periods of use
  • High-density foam construction
  • Weight Restrictions: Up to 160kg (352 lbs)
  • Suggested Waist Size: GT-Style (up to 38"), Rally-Style (up to 44") and Recline seats (up to 50")
  • Contact Trak Racer for other available seat sizes

Specifications:

  • Includes all aluminium profiles and mounting gear
  • The main Chassis is an 8-Slot 120 x 40mm profile
  • Steering wheel uprights are 8-Slot 120 x 40mm profiles

Compatible Wheel Bases

Note: TR One Wheel Mounts are also suitable for Fanatec Direct Drive Wheels (Podium, CSL and Pro)

Front Direct Drive Mount Compatibility:

  • Simucube SC1 / SC2 Sport, Pro, Ultimate
  • VRS Force Pro
  • AccuForce V1/V2 (turn the top cover around to fit)
  • MiGe 130ST(small and big)
  • Bodnar 53 series
  • SIMAGIC ALPHA / ALPHA Mini 
  • Lenze MCS12 series
  • Kollmorgen AKM 52-53-54 (OSW and Leo Bodnar Simsteering systems)
  • Ricmotech Mini-Mite Direct-Drive Steering System Base
  • Fanatec Podium DD1/DD2, DD PRO and CSL DD (by removing the center mount)

Contact us if your wheel is not listed

Compatible Pedals - Pre-Drilled Pedal Plate

  • Fanatec CSL Elite Pedals, ClubSport V1/V2/V3 (including Inverted Pedals)
  • Thrustmaster T-LCM, T3PA, GT Ed, T3PGT, T3PA PRO add-on and T500, T150 pedals
  • Trak Racer Loadcell Pro Pedals (Coming Soon)
  • Heusinkveld Ultimate/Ultimate+, Sprint and Pro
  • Logitech G29, G920, G923
  • Meca Cup1-2, Meca Cup1-3, Clutch and Base Plate
  • VRS DirectForce Pro Pedals
  • HPP PRX 3P, JBV 2/3 Pedal System 
  • Simagic P2000-S100 Pedal Set
  • BJ Sim Racing Steel Series, 1000psi Hydraulic
  • DC Sim Racing DC3
  • Sim Coaches P1-3
  • Simtrecs ProPedal GT
  • Asetek Hydraulic
  • Velazquez Engineering PRO+ Hydraulic
  • Simforge Mark-1
  • 3DRAP Ngasa
  • Protosimtech PT2
  • OBP Pro Race V2 Sim Pedal System
  • Simworx Pro Series
  • WAVE IMPETUS
  • Quaife Throttle Pedal and Brake
  • Cube Controls Hydraulic

Also, Flight/Heavy Equipment

  • Thrustmaster TPR: THRUSTMASTER PENDULAR RUDDER
  • Thrustmaster T.Flight Rudder Pedals
  • Logitech Flight Rudder Pedals
  • Logitech Heavy Equipment 

Contact us if your product is not listed

Compatible Pedals - Direct Fit Aluminium Profile with Heel Plate

  • Trak Racer Loadcell Pro Pedals (Coming Soon)
  • Heusinkveld Ultimate/Ultimate+, Sprint and Pro
  • Meca Cup1-2, Meca Cup1-3, Clutch and Base Plate
  • VRS DirectForce Pro Pedals
  • HPP PRX 3P, JBV 2/3 Pedal System 
  • Simagic P2000-S100 Pedal Set
  • BJ Sim Racing Steel Series, 1000psi Hydraulic
  • DC Sim Racing DC3
  • Sim Coaches P1-3
  • Simtrecs ProPedal GT
  • Asetek Hydraulic
  • Velazquez Engineering PRO+ Hydraulic
  • Simforge Mark-1
  • 3DRAP Ngasa
  • Protosimtech PT2
  • OBP Pro Race V2 Sim Pedal System
  • Simworx Pro Series
  • WAVE IMPETUS
  • Quaife Throttle Pedal and Brake
  • Cube Controls Hydraulic


Contact us if your product is not listed

Compatible Shifters - the Shifter Mount Assembly is an Optional Accessory and not included 

  • Fanatec ClubSport Shifter, SQ
  • Thrustmaster TH8A, RSTSS, TSS+
  • Prosim PSL Sequential Shifter 
  • Trak Racer Sequential Shifter Pro (Coming Soon)
  • Heusinkveld SQ Shifter
  • Logitech G Shifter
  • DSD SQ Shifter
  • Jinx Shifter - additional mount required
  • Simworx Pro Series - additional mount required
  • VNM Simulation Sequential Shifter
  • Quaife PSL Sequential V2, Sequential and H Pattern - additional mount required
  • Aiologs SQ Shifter
  • BJ Sim Racing Shifter 3.0
  • Frex H Pattern

Contact us if your Product is not listed - Handbrake mounts are also available

 

About Trak Racer

Since 2008 Trak Racer has been pioneering the Sim Racing industry with great value and well-designed products. In recent years, Extruded aluminium has come into the sim racing space for benefits such as its strength, expandability and minimal setup costs for the manufacturer when compared to other simulators on the market like the Trak Racer RS6 and TR8.
Disadvantages of this type of simulator are additional setup time and more industrial aesthetics.

Extruded aluminium is a fixed cross-sectional length of aluminium, which has portions “removed” along the length, known as extrusions. This allows for the connection of multiple separate lengths of extruded aluminium which can be used to build simple to very complex structures using a nut that slides into the extrusion and securing with a screw. 80/20 is a registered brand of extruded aluminium (among many others) which is often interchanged with the generic term “extruded aluminium”. Because of its versatility and expandability, extruded aluminium is often used for creating racing simulators. The most common type of extrusion used for sim rigs is “t-slot extruded aluminium”. It features a t-shaped extrusion (most commonly on all sides).

 

Your Competitive Edge Against the World's Elite

Depending on your game you'll have an advantage against the worlds most elite drivers. Invest in the champions rig as trusted by thousands and gain a winning edge against the competition.

 
SKU TR120-NS-DDM
Barcode # 935742300387
Brand Trak Racer
Shipping Width 0.002m
TRACK RACER TR120 Aluminium Racing Cockpit with TR One Front Mounting Wheel Mount for Simucube, VRS, Accuforce, OSW, Mige and more TR120-NS-DDM has a rating of 0/5 based on 0 reviews.

Be The First To Review This Product!

Help other Masten Enterprises Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review