7" HD LCD Rearview mirror monitor with 2 Inputs - Clip On Universal

RRP$199

The DIG Options Rear View Camera Mirror replacement displays your camera image conveniently to the side of a highly reflective mirror. Avoid the clutter of screens on your dash, by simply upgrading your existing mirror to the DIG Options rear view camera mirror and connecting to power. The screen can be switched on automatically when your vehicle is put into reverse or can be left on while driving. Also features 2 Inputs meaning you can add 2 cameras for additional safety.

  • 7” High-Quality LCD Colour HD Monitor for maximum visibility
  • Large highly reflective mirror
  • 2 Camera Video/Audio Inputs
  • Automatic Camera Display. Both camera inputs have a separate power trigger control wire allowing automatic display of cameras when required. The monitor will automatically switch-over to the image of the corresponding triggered camera, then back to the original mode when the trigger stops
  • Convenient Normal/Mirror View switch allows you to assign cameras to a forward facing position (Normal View) or rear facing position (Mirror View) at the touch a button
  • Compatible with PAL and NTSC
  • Universal Clip-on Clamps for a durable and quality install.
  • Low Power Consumption
  • Full Colour LED Backlight Display

​

CCD Mini Reverse Camera Features RRP$99

Universal Mini Square Premium CCD Camera

Short description

DIG Options has become the "Installer's Choice" for car audio equipment. We listen to our customers so that they keep listening with us. DIG Options provide the automotive electronics, dash kits, cables, adapters and more so you can keep your vehicle updated with the latest technology.

Cameras from DIG Options are vigorously tested in harsh Australian conditions and backed for an Australia 12 month warranty.

Description

This listing includes 2 parts which are:

  • A Premium Universal CCD Camera 
  • 5m Video Cable and Integrated Trigger Wire

About the Camera

170° (vertical viewing angle) High Resolution Mini CCD Reversing Park Camera

  • High Resolution Colour CCD Image Sensor with crisp colour display and the latest sensor technology for improved visibility
  • Best-in-Class PAL 704x576 pixel Resolution
  • Special trouble-free micro 4-pin connector means you don’t need to drill huge holes and it makes the install easier
  • High Water/Dust Proof Rating
  • Distance guidelines are built into the camera to offer approximate distance grid lines which range from safe to STOP THE CAR!
  • The 170 degree viewing range with advanced CCD Image Sensor provides the latest technology in reverse cameras.
  • Due to the cameras low light properties it works brilliantly at night using the light generated from your reverse lights and the camera is water resistant.
  • The camera features an RCA plug for connection into your monitor video input as well as built in trigger line which means you won't need to run a separate wire for the reverse power trigger input.

 

Vehicle Compatibility

This part is suitable for all vehicles. Please note that due to this being an aftermarket accessory, some minor work may be required however, you will end up with a good result.

 

12-Month Melbourne-Based Warranty!

Optional Reverse Cameras – If you’re investing in a DIG Options Monitor it’s also recommended that you invest in a DIG Options Camera for peace of mind. Please note, the Masten Premium 4-Pin Connector cameras will need a 4-Pin to RCA Adapter Cable. 

Optional TPMS – For additional safety why not add the Masten Professional Tyre Pressure Monitor System (TPMS) to monitor up to 4 tyres on your vehicle or whatever you’re towing. Available with hidden valve-type sensors or convenient cap-style sensors. 

 

What's Included.

Premium Mirror with Clip-On Clamps

All Cables Included for Powering

Remote Control

CCD Mini Camera

Panel Specifications
Display/Monitor Size: 7 Inch
Monitor Panel Type: Upgraded Masten Digital LCD Panel
Display Colour: Full Colour
Waterproof Rating (with Certification): Not applicable
TV System:  NTSC/PAL AUTO
Resolution: 800 x R.G.B x 480 Pixels
Aspect ratio: 16:9
Viewing angle: U:100°, V/L: 80°
Brightness: 350cd/㎡
Contrast: 200:1
Lattice Distance:  
Physical Specifications
Monitor Housing Material: Plastic
Monitor Bracket Type: Clip Over
Monitor Bracket Material: ABS
Camera Specifications
Camera Inputs: 2
Camera Connection Type: RCA
Automatic Camera Display (separate trigger wire): Yes - 1 Cameras via Trigger Line from Power Source
4 (Quad) Camera View: No
Other Specifications
Mirror Size: 234*91mm
Built-in Speaker: Yes
Bilingual Menu System: Yes 
Day/Night Mode Switch: NA
Mirror/Natural Camera View Selection: Yes
Remote Control: Yes
Working voltage: 12V
DC Power Overload Protection Yes
Working Current: 0.12
Operating Temperature -10℃'~+50℃
Storage Temperature -30℃~+70℃
Operating humidity: 20-85%
Product Net Weight: 0.60KG
Product Dimensions: 250*110mm
SKU MM-03
Barcode # 2000000002392
Brand DIG Options
Shipping Weight 1.0000kg
Shipping Width 0.060m
Shipping Height 0.300m
Shipping Length 0.170m
Unit Of Measure ctn
Assembled Length 0.175m
Assembled Height 0.065m
Assembled Width 0.060m

Shipping and Handling

Important. Although many sellers may state they are located in Australia, they may not be. Before any purchase check that the goods are in Australia. If the goods are shipped from overseas you may need to wait longer for your item, need to pay customs taxes and return a faulty product back overseas. Unless otherwise stated, ALL Factory Fit items are warehoused in Melbourne, Australia.

Factory Fit will ship to confirmed Paypal addresses only. In most cases you will receive your item within 4 days. If there is a delay Factory Fit will be in contact with you. Please advise your phone number at checkout so we can get in touch with you if there is any problem.

If requested, we can supply the tracking number to you. If we are shipping outside Australia then the buyer is responsible for destination import tax/charges. We will reduce this where possible by nominating a low value and sending as a 'gift'. Factory Fit reserves the right not to be held responsible for a delay caused by import customs as this is out of our control.

Factory Fit will supply all international customers and in most cases ship direct from our freight forwarder in China. If you have any concerns please ask.

 

Payment Policy

Immediate Payment is required after the Winning Bid via paypal. If you do not have a Paypal account, please message us for another payment option. Discounts apply for direct deposit and cash with local pickups. If you require our Company Bank Account details for direct deposit please email or message us.

 

Returns Policy

Factory Fit products are covered by a minimum 1 year warranty from the original purchase date. Following any repairs or replacement you will be covered by a minimum 1 month warranty or the remainder of your new product warranty, whichever is greater. If you do find a product purchased from Factory Fit becomes faulty within 12-months of your purchase, simply send the faulty part back for repair or replacement (at our discretion). Non-manufacture faults (neglect, improper installation, misuse or incorrect service) and consumables are not be covered by this warranty. Freight  to and from our service centre in Melbourne to be covered by the buyer. Please message Factory Fit for detailed terms of this warranty.

Note. The limited Factory Fit warranty is not transferable and all warranties should be handled through the original purchaser. Factory Fit reserves the right to refuse warranty in such cases.

Factory Fit guarantees that all items sold are brand new and quality tested before shipment (unless otherwise stated).

Important: If a non-manufacturing fault is found during a Factory Fit inspection, Factory Fit will request from the purchaser the repair cost plus two way postage before the product is returned.

Factory Fit offers a 7 day return policy. In the unlikely event that you receive an incorrect item, please ensure you return it to Factory Fit within 7 days, in original packaging and in brand new, un-installed, resalable condition. Please contact us for a Return Authorisation Form (RTA) before sending anything back to Factory Fit.

 
About Us

Factory Fit is a Melbourne, Australia based operation and since 2008, a proud supplier to the Car Audio/Video industry on a wholesale base. Factory Fit are now going direct to offer consumers and installers the best value for money on car audio fitting accessories to become the number one supplier. We have over 10 years experience in electronics, tooling, industrial design and engineering, and we are proud to acknowledge our commitment to offering a high level of After Sales service, even years after your purchase. We provide an Australian phone number on request and unlimited support during business hours.

Factory Fit will strive to offer a large range of accessories for any vehicle. If you have an item you are looking for please message us and if we can get it, we will order it in for you.

LEGAL DISCLAIMER:

It is an offence to copy the descriptions and/or images of another business/seller. If you copy any of our descriptions or images we will contact eBay and your account will be suspended. Factory Fit reserves the right of all descriptions and images listed in this listing.

 
7" HD Digital Clip On LCD Rearview mirror monitor with 2 Inputs has a rating of 0/5 based on 0 reviews.

Be The First To Review This Product!

Help other Masten Enterprises Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review